Diathermic furnace sensor

? ? ? ? Diathermic furnace sensorIt is a key component of forging diathermy equipment. It is also called a furnace head, an inductor or an induction heating coil. It is generally used in conjunction with the power supply of a diathermy furnace and is installed on the furnace body bracket. Its cooling water inlet and outlet are connected with the electric power supply. The busbar and the center height of the inductor can be used interchangeably with inductors of different specifications. That is, a set of diathermic furnace power supply can be matched with inductors of various specifications, which greatly improves the use efficiency of the diathermic furnace. under,Haishan electric furnaceThe editor summarized someDiathermic furnace sensorThe relevant knowledge is as follows for your reference.

? ? ? ?Diathermic furnace sensorIt is the heart of the entire medium frequency diathermy system, consisting of induction coil, furnace frame, bottom bracket, furnace mouth plate, bakelite board, copper water nozzle, hose hoop, cooling water channel, copper screws, bakelite columns, connecting rows, furnace lining materials, stainless steel water etc. composition.

? ? ? 1、Diathermic furnace sensorOr called an inductor coil, it is generally made of rectangular copper tubes with consistent metal flow and dense structure. The rectangular copper tubes are made of 99.9% T2 copper. The induction coil in the burner head of the Haishan electric furnace takes into account the influence of the inherent length of the rectangular copper tube when designing the water path and coil grouping. It is composed of coils with different numbers of turns and is fixed together with bakelite pillars. In addition, each set of coils uses the welding of copper pipes to combine the current and water diversion parts, so that each set of induction coils is wound around the entire copper pipe without the need for welding seams inside.

? ? ? 2、Diathermic furnace sensorOr the outer insulation of the sensor coil is sprayed with a layer of high-strength insulating resin using an electrostatic spraying process. The temperature resistance exceeds 600 degrees and the withstand voltage of the insulation layer is greater than 5000V.

? ? ? 3、Diathermic furnace sensorFurnace lining is used internally to isolate the heated metal materials and coil copper tubes. The furnace lining is suitable forDiathermic furnace sensorThe coil plays a protective role,Diathermic furnace sensorThere are two types of lining materials for inductor coils:

a) The furnace lining is made of ram-cast furnace lining with high temperature resistance, high thermal strength and good insulation performance.Diathermic furnace sensorIts refractory degree is 1750℃. This structure makes the inductor have a long life and the induction coil has a high protection level. It is a new furnace construction process. It also facilitates the installation and alignment of online temperature measurement and has high temperature measurement accuracy. It is often used in current heating processes.

b) Adopt silicon carbide prefabricated furnace lining, and the outside is wrapped with insulation and heat preservation materials. Refractory degree 1450℃, easy to replace. However, it is not conducive to temperature measurement and control of workpiece heating. It is not suitable for heating large workpieces and is fragile.

? ? ? 4、Diathermic furnace sensorThe installation standards, appearance dimensions, circuits, waterway connections, etc. have all considered interchangeability, making it easy to replace. The waterway is a quick-change joint.

If anyDiathermic furnace sensorFor needs, please call Manager Guo at 13891812360; moreDiathermic furnace sensorFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com