Medium frequency electric furnace reactor

? ? ? ?Medium frequency electric furnaceReactorIt is commonly used in intermediate frequency power supplies and installed in intermediate frequency power supply cabinets. According toMedium frequency electric furnaceDifferent heating powers are available in different models.Reactor. Its structure is a double set of coils wound around the outside of a silicon steel sheet and cooled by water. The insulation of the reactor is achieved through insulating paint, glass ribbons and insulating tapes. under,Haishan electric furnaceLet me talk about itMedium frequency electric furnaceReactor。

one,Medium frequency electric furnaceReactoruse

? ? ? ?1、Medium frequency electric furnaceReactorIt can make the output current of the intermediate frequency furnace rectifier smooth and stable.

2. When the inverter thyristor is short-circuited,Medium frequency electric furnaceReactorLimit the growth rate of short-circuit current and the size of the maximum short-circuit current.

? ? ? ?3、Medium frequency electric furnaceReactorIt is one of the important components of impedance matching, which is used for step-down, isolation and impedance matching of intermediate frequency power supply.

4. IfMedium frequency electric furnaceReactorUnreasonable parameter design, poor core material or substandard manufacturing process will have a great impact on the working reliability of the intermediate frequency power supply.

two,Medium frequency electric furnaceReactorOperating environment conditions
1. The altitude does not exceed 1,000 meters.
2. The operating environment temperature is -5℃~+50℃, and the relative humidity does not exceed 90%.
3. There must be a water source for cooling when used. The inlet pressure of cooling water is required to be 0.2MPa~0.3MPa.

4. There should be no mechanical impurities in the cooling water, the solid content should not exceed 250mg/L, and the hardness should not be greater than 10 degrees.

? ? ?5、Medium frequency electric furnaceReactorWhen put into operation, the water must not be cut off, and the inlet water temperature is 5 to 35°C.
6. The installation site has no explosion hazard, no gas and conductive dust that can corrode metal and damage insulation, and no severe vibration and bumps.

three,Medium frequency electric furnaceReactorStructural features

? ? ? 1、Medium frequency electric furnaceReactorIt is an indoor, water-cooled device with the characteristics of compact and reasonable structure and easy use.Medium frequency electric furnaceReactorIt consists of magnetic circuit, primary and secondary windings, and cooling water circuit.
? ? ? ?2、Medium frequency electric furnaceReactorThe iron core is a shell structure, which is made of δ0.35mm cold-rolled high-silicon steel sheets. The coil adopts a pie structure, wound with T2 rectangular copper tube, and the original and secondary sides are overlapped. Both the iron core and the coil are water cooled. The primary and secondary sides can be arbitrarily combined into odd or even turns ratios as needed.
3. When users use it according to the power, frequency, water cooling requirements and other conditions specified by the product, it can be used in intermittent working or continuous working.
4. In order to reduce the tediousness of users in connecting waterways, eachMedium frequency electric furnaceReactorEquipped with a set of "water collectors" to make installation and operation more convenient and reliable.

Four,Medium frequency electric furnaceReactorWaterway connection:

? ? ?Medium frequency electric furnaceReactorThe cooling water pipe connection adopts standardized universal induction equipment water and electricity connection interface; eachMedium frequency electric furnaceReactorDetailed waterway connection diagrams are provided when leaving the factory;

five,Medium frequency electric furnaceReactorStrict factory inspection:
? ? ?Medium frequency electric furnaceReactorComply with JB-T3924-1999 national standard regulations for reactors used in medium frequency induction heating devices; each unitMedium frequency electric furnaceReactorAll have passed a 3KV high-voltage one-minute withstand voltage test. From assembly to delivery, each unit has undergone four hydraulic pressure tests of no less than 0.5MPa to ensure product quality.

six,Medium frequency electric furnaceReactorThe advantages:

1. Protect the induction coil,Medium frequency electric furnaceReactorIt can limit the current, reduce the current peak value, and reduce the electromagnetic field intensity of the induction coil in the furnace, thereby protecting the coil and extending its life.

2. Control electromagnetic energy input,Medium frequency electric furnaceReactorIt can control the input of electromagnetic energy, control the temperature of smelting materials and furnace temperature, and ensure stable quality.

3. Improve production efficiency,Medium frequency electric furnaceReactorControlling the output current waveform of the power supply can control the input of electromagnetic energy, thereby improving production efficiency and production quality.

4. Save energy by controlling the input of electromagnetic energy.Medium frequency electric furnaceReactorIt can help save energy and improve production efficiency and production quality while reducing energy consumption.

If anyMedium frequency electric furnaceReactorFor needs, please call Manager Guo at 13891812360; moreMedium frequency electric furnaceReactorFor information, please follow the website of Shaanxi Haishan Mechanical and Electrical Co., Ltd. http://www.sxhszpl.com